2024/07/03
Notice
Notice of Exhibition at Automotive Engineering Exposition Nagoya
Date & Time : July 17 (Wed) - July 19 (Fri), 2024, 10:00 - 17:00
Location : Aichi Sky Expo
Booth Location : Hall F 154
Exhibition Website: Click here

・Main Exhibited Products
1. Next-generation fully automatic underfill dispenser " FAD5700"
2. For precise and high-volume dispensing of 2-part mixed materials! "DUAL MPP-5-M-GF-MINI"
3. Achieving both ultra-high speed and high output "Non-contact Jet Dispenser SuperJet3 "
4. High-flow liquid gasket application for ECUs "MOHNO MASTER V3"
5. Uniform, wide-area film coating " Coating Valve CV-15"

In addition to these, we will be exhibiting many other products for automotive, electronic components, and thermal management, including numerous new products.
Please stop by our booth and feel free to consult with us about customizations and anything else.

・Regarding Attendance
Please note that advance registration is required for attendance, so please do not forget to register.

We look forward to seeing you there.
2024/06/21
Notice
Notice of Change in Office Name for Musashi Shenzhen
We would like to express our sincere gratitude for your continued support.
We are writing to inform you that the name of our Shenzhen office has been changed. The details are as follows.

Before change:
武蔵高科技(香港)有限公司 深圳代表处
MUSASHI ENGINEERING HONG KONG LIMITED SHENZHEN OFFICE

After change:
武藏(上海)电子科技有限公司深圳分公司
MUSASHI ENGINEERING SHANGHAI LTD SHENZHEN SUBSIDIARY COMPANY

This change is intended to support our business expansion and improve our services.
We kindly ask for your continued support and patronage.
2024/06/19
Notice
Notice of Exhibition at Robot Technology Japan
Date and Time: July 4 (Thu) - July 6 (Sat), 2024, 10:00 - 17:00 *Closes at 16:00 on the final day.
Venue: Aichi Sky Expo
Booth Location: Hall D D39
Exhibition Website: Click here

・Main Exhibits
1. Non-stop alignment and height measurement: "Desktop Robot with PC-Controlled Image Recognition 350PCSmart"
2. Tighten two types of screws with a single driver! "High-Precision, High-Speed Desktop Screw-Tightening Robot"
3. Realizing easy teaching: "Deburring Robot"
4. Automated production using desktop robots! "Articulated + Desktop Robot"

We will be exhibiting many other new products and robot applications covering everything from research and development to manufacturing.
Please feel free to stop by our booth and consult with us about customizations or any other needs.

・Regarding Attendance
Please note that advance registration is required to attend, so please do not forget to register.

We look forward to seeing you there.
2024/06/13
Notice
Notice of "MuCAD BOOK" Software Update
Thank you for using our website.
We have updated the "MuCAD BOOK" content in the "Download" section as follows.
If your software version is different from the latest version, please install the latest version before use.

Update start date: June 13, 2024
Update details: Fixed software bugs.
Latest version: VER.1.1.1
2024/06/12
Notice
Notice of Exhibition at Farmer Lab EXPO

We will be exhibiting at Farmer Lab EXPO 2024.
- Date and Time
June 26 (Wed) - June 28 (Fri), 2024, 10:00 - 17:00
- Venue
Tokyo Big Sight
- Booth Location
East Hall 6, 42-1

- Main Exhibited Products
  1. Automatic dilution to any specified ratio! "Dispensing and Dilution System for Analytical Pretreatment"
  2. Automate tube filling and capping! "Chemical Filling & Capping System"
  3. Automatic filling to the mark with easy setup! "Automatic Make-up System"
  4. Change chemical type and dispensing volume for each spot! "High-speed, Non-contact Reagent Spotting System 8-channel JET SPOTTER"

    In addition to these, we will be exhibiting many other products for the pharmaceutical and bio industries, from research and development to manufacturing.
    Please stop by our booth and feel free to consult with us about customizations and more.

- Regarding Attendance
  Please note that advance registration is required to attend, so please do not forget to register.

  We look forward to seeing you there.
2024/06/03
Notice
Notice of Product Explanation Video Update
Thank you very much for always using our website.
We have newly added "Product Explanation Videos" for the following four products,
aimed at providing detailed introductions to the products.

1. Full-function Digital Control Dispenser SuperΣCMⅣ
A dispenser capable of precise digital control using the latest technology. It combines operability and functionality to meet the needs of any production site.
2. Two-fluid Spray Valve for Solvent-free Coating Materials SSV
Achieves eco-friendly and efficient coating. Designed specifically for medium to high-viscosity materials, it enables uniform and fine spraying.
3. Two-fluid Spray Valve for Solvent-free Coating Materials FSV
The unique one-touch switching structure allows for adjustment of the coating shape. It flexibly adapts to various coating conditions for a high-quality finish.
4. Coating Valve CV-15
A coating valve that has evolved significantly from previous models. It is ideal for tasks requiring uniform and precise coating over a wide area.

The videos clearly explain the features, new functions, and even actual operation examples of each product.
Please make use of them when selecting products or when you want to deepen your understanding of how to use them.
2024/05/28
Notice
Notice of Exhibition and Seminar Participation at JISSO PROTEC

JISSO PROTEC ExhibitionWe will be exhibiting at.

 ・Date and Time
   June 12 (Wed) - June 14 (Fri), 2024, 10:00 - 17:00

 ・Venue
   Tokyo Big Sight

 ・Booth Location
   East Hall 4, Booth No. 4C-30

 ・Main Exhibited Products
    1. Next-generation underfill fully automatic dispenser " FAD5700 "
    2. Fully automatic conformal coating system " FCD1200 "
    3. Coating valve " CV-15 "
    4. Spray valve for solvent-free coating materials " SSV "

    We will also be exhibiting other new products, so
    please feel free to stop by our booth and consult with us about anything.

    Additionally, we will be participating in two seminars during the event.

"PROTEC Seminar"
 ・Seminar Date and Time
   June 12, 2024 (Wed) 11:45 - 12:30
 ・Seminar Venue
   Seminar Room H
 ・Abstract
   Introduction to dispensing technology for large substrates and mounted components

"Exhibitor (NPI) Seminar"
 ・Seminar Date and Time
   June 14, 2024 (Fri) 11:40 - 12:00
 ・Seminar Venue
   Seminar Room D
 ・Abstract
   Introduction to dispensing technology for large substrates and mounted components

 ・Regarding Attendance
    Please note that advance registration is required for attendance, so please do not forget to register.
   
 Please feel free to consult with us.
 We look forward to seeing you there.

2024/05/22
Notice Notice of Exhibition at FOOMA JAPAN

FOOMA JAPAN 2024We will be exhibiting at.

- Date and Time
June 4 (Tue) - June 7 (Fri), 2024 10:00 - 17:00

- Venue
Tokyo Big Sight

- Booth Location
East 5M-51


- Main Exhibited Products
1. Drawing the future with MUSASHI's dispensing technology that can automatically create complex shapes. "3D Food Printer"
2. Jetting and stacking chocolate! Any height you want! "3D JET Ornament Molding System"
3. Draw any picture you want with tortoiseshell candy! "Tortoiseshell Candy Molding System"
4. Portioning and weighing of seasonings. "Powder Filling & Weighing System"


We will be exhibiting many products for the food industry, from research and development to manufacturing, including many other new products, so
please stop by our booth and feel free to consult with us about anything, including customizations.

- Regarding your visit
Please note that advance registration is required for your visit, so please do not forget to do so.

We look forward to seeing you there.

2024/05/08
Notice Notice of Exhibition at Automotive Engineering Exposition 2024 Yokohama

We will be exhibiting at Automotive Engineering Exposition 2024 YOKOHAMA.

 ・Date and Time
   May 22 (Wed) – May 24 (Fri), 2024, 10:00–18:00 (9:00–16:00 on the final day only)

 ・Venue
   PACIFICO Yokohama

 ・Booth Location
   Booth No. 467


・Main Exhibited Products
    1. Next-generation fully automatic underfill dispenser " FAD5700 "
    2. For precise, high-volume dispensing of two-component materials! "DUAL MPP-5-M-GF-MINI"
    3. Achieving both ultra-high speed and high output "Non-contact Jet Dispenser SuperJet3 "
    4. Liquid gasket application for ECUs "MOHNO MASTERV2"
    5. Uniform, wide-area film coating " Coating Valve CV-15 "


    We will be exhibiting many other products for automotive, electronic components, and thermal management applications, including numerous new products.
    Please stop by our booth and feel free to consult with us about customizations or anything else.

 ・Regarding Attendance
   Please note that advance registration is required to attend, so please do not forget to register.

 We look forward to seeing you there.

2024/05/01
Notice
Certified as a 2024 Health & Productivity Management Outstanding Organization
Thank you for visiting our website.

We have been certified as a 2024 Certified Health & Productivity Management Outstanding Organization (Small and Medium-sized Enterprise Category) for practicing management that considers the health of our employees and others.
We will continue to strive for sound corporate management by creating an environment where each and every employee can work in good physical and mental health.

*What is the "Certified Health & Productivity Management Outstanding Organization Recognition Program"?
The Certified Health & Productivity Management Outstanding Organization Recognition Program is an award system recognized by the Nippon Kenko Kaigi to "visualize" large enterprises, small and medium-sized enterprises, and other corporations that practice particularly excellent health and productivity management,
with the aim of creating an environment where they can receive social recognition from employees, job seekers, affiliated companies, financial institutions, etc.
(Excerpt from the Ministry of Economy, Trade and Industry website)

Certified Health & Productivity Management Outstanding Organizations Recognition Program 2023
04/24/2024
Notice
Notice of Exhibition and Seminar Participation at Adhesive & Joining Expo [Osaka]

We will be exhibiting at the Adhesives & Bonding Expo [Osaka] Exhibition.

 ・Date and Time
   May 8 (Wed) – May 10 (Fri), 2024, 10:00–17:00

 ・Venue
   Intex Osaka

 ・Booth Location
   Hall 2, Booth No. 1-24

 ・Main Exhibited Products
    1. Multi-purpose fully automatic dispenser " FAD2500SD "
    2. Combining ultra-high speed and high output " SuperJet3 "
    3. Precision dispensing for 2-part materials " DUAL MPP-1 "
    4. Industry-first, equipped with environmental protection features " SuperΣCMⅣ "
    5. Spray valve compatible with solvent-free coating materials " SSV "

    We will also be exhibiting many other new products for the first time,
    so please stop by our booth and feel free to consult with us about anything.

    Additionally, we will be participating in the "Exhibitor New Technology Introduction Seminar" during the event on the following schedule.

   We will introduce how dispensing technology enables material waste reduction and energy conservation.

 ・Regarding Attendance
    Please note that advance registration is required for attendance, so please do not forget to register.
   
 Please feel free to consult with us.
 We look forward to seeing you there.

>

04/18/2024
Notice
Notice of Change to Foreign Language Website URL
Thank you for visiting our company website.

We have updated the URLs for the following language sites to improve site usability.
If you have bookmarked or saved these pages in your browser, we apologize for the inconvenience, but please register them again.


Target language sites:
English, Simplified Chinese, Traditional Chinese, Korean, German, French, Thai, Vietnamese, Indonesian

Change date:
From April 17, 2024

We will continue to provide useful information, and we appreciate your continued support.

03/27/2024
Notice
Notice of Exhibition at M-Tech Nagoya (Mechanical Components & Materials Technology Expo)

We will be exhibiting at the Manufacturing World Nagoya (Mechanical Components & Materials Technology Expo)< ef-text>Nagoya Mechanical Components & Materials Technology Expo.

 ・Date and Time
   April 10 (Wed) - April 12 (Fri), 2024, 10:00 - 17:00

 ・Venue
   Portmesse Nagoya

 ・Booth Location
   Hall 1, Booth No. 13-11

 ・Main Exhibited Products
  1. Solvent-free coating/grease spraying "2-Fluid Spray Valve SSV"
  2. Achieving "high-speed tact" for screw tightening operations. "Desktop Screw Tightening Robot"
  3. Liquid gasket application to ECUs "MOHNO MASTERV2"
  4. Inline Cartesian general-purpose robot "CROSSMASTER RX"
  5. Supports L-size boards. Local & wide coating for boards "FCD1200"

    We will be exhibiting many products, including numerous other new proposals, so please stop by our booth and feel free to consult with us about customizations or anything else.


 ・Regarding Attendance
    Please note that advance registration is required to attend, so please do not forget to register.

 Please feel free to consult with us.
 We look forward to seeing you there.

2024/03/06
Notice
Notice of Exhibition at productronica China

We will be exhibiting at productronica China.

- Date and Time
March 20 (Wed) - March 22 (Fri), 2024, 9:00 - 17:00 (until 16:00 on the final day)

- Venue
Shanghai New International Expo Centre

- Booth Location
Hall E6, Booth No. 6102

- Main Exhibited Products
1. Achieving both ultra-high speed and high output: "Ultra-high speed, non-contact jet dispenser SuperJet3"
2. For precise, high-volume dispensing of two-component materials: "DUAL MPP-5-M-GF-MINI"
3. The optimal solution for gasket sealing (CIPG/FIPG) application: "MOHNO MASTER V3"
4. Spray valve compatible with solvent-free coating materials: " SSV "

Please stop by our booth and feel free to consult with us about anything.

- Regarding your visit
Please check here for information regarding your visit.

We look forward to seeing you there.

02/29/2024
Notice
Notice of Exhibition at PharmaLab Expo Osaka

PharmaLab EXPO OsakaWe will be exhibiting at.

- Date and Time
March 13 (Wed) - March 15 (Fri), 2024 10:00 - 17:00

- Venue
INTEX Osaka

- Booth Location
Hall 5, Booth No. 13-22

- Main Exhibited Products
1. Automatic dilution to any specified ratio " Dispensing and Dilution System for Analytical Pretreatment"
2. Automate tube filling & capping! "Liquid Filling & Capping System"
3. Easy setup, automatic filling to the mark! "Automatic Make-up System"
4. Draw whatever you want with Bekko-ame (tortoiseshell candy)! "Bekko-ame Molding System"

We will also be exhibiting new products for the first time, so
please stop by our booth and feel free to consult with us about anything.

- Regarding your visit
Please note that advance registration is required for entry, so please do not forget to register.

Please feel free to consult with us.
We look forward to seeing you there.

01/10/2024
Notice
Notice of Exhibition and Seminar Participation at NEPCON JAPAN

We will be exhibiting at NEPCON JAPAN.

 ・Date and Time
   January 24 (Wed) – January 26 (Fri), 2024, 10:00–17:00

 ・Venue
   Tokyo Big Sight

 ・Booth Location
   East Hall 2, Booth No. E-12-26

 ・Main Exhibits
    1. Next-Generation Fully Automatic Underfill Dispenser " FAD5700 "
    2. Dispensing Inspection System " FIS1000 "
    3. Fully Automatic Conformal Coating System " FCD1200 "
    4. Coating Valve " CV-15 "
    5. Spray Valve for Solvent-Free Coating Materials " SSV "

    We will also be showcasing many other new products for the first time,
    so please feel free to stop by our booth and consult with us on any matter.

    Additionally, we will be participating in the "New Product & New Technology Seminar ~New Tech Trend~" during the event on the following schedule.

   We will unveil new products from Musashi Engineering that contribute to reducing liquid material waste and improving the efficiency and labor-saving of dispensing processes.

 ・Visitor Information
    Please note that advance registration is required for entry, so please be sure to complete it.
   
 Please feel free to consult with us.
 We look forward to seeing you there.

11/29/2023
Notice Notice of Exhibition at SEMICON Japan

We will be exhibiting at SEMICON Japan.

- Date and Time
   December 13 (Wed) - December 15 (Fri), 2023, 10:00 - 17:00

- Venue
   Tokyo Big Sight

- Booth Location
   East Hall 2, Booth No. 2209

- Main Products Exhibited
    1. Next-generation fully automatic underfill dispenser "FAD5700"
    2. Underfill dispensing shape inspection "FIS1000"
    3. Non-contact polyimide dispensing for power modules "FAD2500SD"
    4. Solvent-free coating/grease spraying "2-fluid spray valve SSV "

    We will be exhibiting many other products, including numerous new proposals, so
    please feel free to stop by our booth and consult with us about anything, including customization.

- Regarding Attendance
    Please note that advance registration is required to attend, so please do not forget to register.
   
 Please feel free to consult with us.
 We look forward to seeing you there.

11/20/2023
Notice Notice regarding "MuCAD BOOK" software update
Thank you for using our website.
We have updated the "MuCAD BOOK" in the "Download" section as follows.
If your software version is different from the latest version, please install the latest version before use.

Update start date: November 20, 2023
Update details: Added support for the new product SUPER ΣCMⅣ.
Latest version: VER.1.1.0
11/20/2023
Notice "New Product" Release of the All-Digital Control Dispenser SuperΣ®CMⅣ
We have added the following new page to the "Product Information" section.

Air Pulse System
・Full-function digital control dispenser SuperΣ®CMⅣ
10/02/2023
Notice Notice of change in Representative Director and President
We are pleased to announce that effective September 20, 2023, Kazumasa Ikushima has been appointed as Representative Director and Chairman, and Naotoshi Ikushima has been appointed as Representative Director and President.


Musashi Engineering, Inc. September 20, 2023 (Wed)



We look forward to your continued support of Musashi Engineering.

Please check the full press release here.
10/02/2023
Notice Notice of exhibition at productronica
We will be exhibiting at productronica 2023.

・Date and Time
November 14 (Tue) - November 17 (Fri), 2023, 9:00 - 18:00 (until 16:00 on the final day)

・Venue
Messe München, Germany

・Booth Location
Hall B3 340

・Exhibition Details
We will be showcasing our cutting-edge dispensing systems and fully automatic dispensing machines that contribute to high-precision, micro-dispensing, bonding, and joining processes in manufacturing for the semiconductor, assembly, and peripheral fields, with a focus on smartphones, automobiles, and MEMS.
If you have challenges with your dispensing processes, are considering improvements in productivity or cost reduction, or are interested in state-of-the-art dispensing technology, please be sure to visit our booth.

We look forward to seeing you there.



10/02/2023
Notice Notice of exhibition at NEPCON Nagoya

We will be exhibiting at Nepcon Nagoya.

- Date and Time
   October 25 (Wed) - October 27 (Fri), 2023, 10:00 - 17:00

- Venue
   Portmesse Nagoya

- Booth Location
   Hall 1, Booth No. 14-1

- Main Products Exhibited
  1. Solvent-free coating/grease spraying "2-Fluid Spray Valve SSV"
  2. High-volume 2-part thermal material dispensing "MPP-3-GF-MINI"
  3. Liquid gasket application for ECUs "MOHNO MASTERV2"
  4. Local & wide coating for circuit boards "FCD1000"

    We will be showcasing many other products, including numerous new proposals, so please feel free to stop by our booth and consult with us about anything, including customizations.
    We look forward to seeing you there.

- Regarding Attendance
    An invitation ticket is required for entry. Please present this ticket on your screen or bring a printed copy. (One business card is required at the reception.)

 Please feel free to consult with us.
 We look forward to your visit.

10/02/2023
Notice Notice of exhibition at Manufacturing World

We will be exhibiting at Monozukuri Fair 2023.

 ・Date and Time
   October 18 (Wed) – October 20 (Fri), 2023, 10:00–17:00 (until 16:00 on the final day only)

 ・Venue
   Marine Messe Fukuoka Hall A & B

 ・Booth Location
   Hall B, Booth No. BN-25

 ・Main Exhibited Products
  1. Solvent-free coating/grease spraying: "2-Fluid Spray Valve SSV"
  2. Non-contact solder paste application for electronic circuit boards: "High-Viscosity Non-Contact Jet Dispenser SuperHiJet"
  3. Automate tube filling and capping! "Chemical Filling & Capping System"
  4. Industry 4.0 fully compatible, full-function digital control dispenser: "ML-8000X"

    We will be exhibiting many other products, including new proposals, so
    please stop by our booth and feel free to consult with us about customizations or anything else.

 ・Regarding Attendance
    Advance visitor registration is required to attend, so please print your admission pass and bring it with you. (One business card is also required at the reception.)

 Please feel free to consult with us.
 We look forward to seeing you there.

09/19/2023
Notice Notice of exhibition and seminar participation at Adhesive & Joining EXPO

We will be exhibiting at the Highly-Functional Material Week - Adhesives & Bonding Expo.

- Date and Time
October 4 (Wed) - October 6 (Fri), 2023, 10:00 - 18:00 (until 17:00 on the final day only)

- Venue
Makuhari Messe

- Booth Location
Hall 7, Booth No. 45-24

- Main Exhibits
1. Solvent-free coating / Grease spraying " 2-Fluid Spray Valve SSV "
2. Ultra-high-speed, non-contact flux application to gold pads " SuperJet2"
3. Solder paste application and laser melting " DISPENSE LASERMASTER"
4. High-speed, fine application of PUR " HM-MSD3 "

We will be exhibiting many products, including numerous other new proposals, so please stop by our booth and feel free to consult with us about customizations or anything else.


- Regarding Admission
An invitation ticket is required for entry, so please present this ticket on your screen or print it out and bring it with you. (One business card is required at the reception.)

Also, we will be participating in the exhibitor's new technology introduction seminar on the following date during the exhibition period.

- Seminar Date and Time
October 4, 2023 (Wed) 13:30 - 14:15
- Abstract
In addition to introducing the benefits and energy-saving properties of dispensing technology in adhesion and bonding, we will propose dispensing solutions that lead to CO2 reduction and solvent-free processes.
- Regarding Seminar Attendance
Separate registration is required for attendance via this page.
Also, please have one business card ready on the day of the seminar.

Please feel free to consult with us.
We look forward to seeing you there.

08/19/2023
Notice Notice of exhibition at JASIS

We will be exhibiting at JASIS.

- Date and Time
September 6 (Wed) - September 8 (Fri), 2023 10:00 - 17:00

- Venue
Makuhari Messe Exhibition Hall 4-6

- Booth Location
Booth No. 5A-504 (Hall 5)

- Main Products Exhibited
1. Powder filling and weighing: "Automatic Powder + Liquid Filling System"
2. Automatic dilution to any specified ratio: "Dispensing and Dilution System for Analytical Pretreatment"
3. Automate tube filling and capping!: "Chemical Filling & Capping System"
4. Change the type and volume of chemical for each spot!: "High-Speed, Non-Contact Reagent Spotting System 8-Channel JET SPOTTER"


We will be exhibiting many products for the scientific and chemical industry, including numerous other new proposals, so please stop by our booth and feel free to consult with us about customizations or anything else.

- Regarding your visit

We recommend pre-registration for your visit; please make use of it.

Please feel free to consult with us.
We look forward to seeing you there.

08/17/2023
Notice Notice of expansion and relocation of Shanghai Branch

Thank you for your continued patronage of our products.
We are pleased to inform you that our Shanghai branch will be relocating to larger premises to accommodate our business expansion.


All of our staff are committed to further improving our services for all our customers and ensuring your satisfaction.
We appreciate your continued support.



Room 102, Building 4, No.1999 Shenkun Road, Minhang District, Shanghai,China



There is no change to the number.



August 18, 2023

*Please be careful not to make any mistakes when sending items.
06/30/2023
Notice Notice of exhibition at Automotive Engineering Exposition Nagoya

We will be exhibiting at Automotive Engineering Exposition 2023 NAGOYA.

- Date and Time
July 5 (Wed) - July 7 (Fri), 2023 10:00 - 18:00 (until 17:00 on the final day only)

- Venue
AICHI SKY EXPO

- Booth Location
Booth No. 129

- Main Exhibited Products
1. The optimal solution for gasket seal (CIPG/FIPG) application. "MOHNOMASTER"
2. Ideal for precision application of two-component mixed materials. "DUAL-MPP"
3. High-speed, non-contact application of solder paste to electronic circuit boards. "Super Hi Jet"
4. High-speed, non-contact application of high-viscosity liquids. "AEROJET"
5. Ideal for high-speed application of filler-containing thermal interface materials. "MSD3-HF"

We will also be exhibiting many other products for automotive, electronic components, and thermal management applications, including numerous new products.
Please feel free to stop by our booth and consult with us about anything, including customization.

- Regarding Attendance
Please note that advance registration is required to attend, so please do not forget to register.

Please feel free to consult with us.
We look forward to seeing you there.

06/30/2023
Notice Notice of Exhibition at PharmaLab EXPO

PharmaLab EXPO TokyoWe will be exhibiting at.

- Date and Time
July 5 (Wed) - July 7 (Fri), 2023 10:00 - 17:00

- Venue
Tokyo Big Sight, East Halls 1-7

- Booth Location
Booth No. 37-6 (East Hall 5)

- Main Exhibited Products
1. Powder filling and weighing " Powder + Liquid Automatic Filling System "
2. Automatic dilution to any specified ratio " Dispensing and Dilution System for Analytical Pretreatment"
3. Automate tube filling & capping! " Chemical Liquid Filling & Capping System"
4. Change the type and dispensing amount of chemical liquid for each spot! " High-speed, Non-contact Reagent Spotting System 8-channel JET SPOTTER"


We will be exhibiting many products for the scientific and chemical industry, including many other new proposals.
Please stop by our booth and feel free to consult us about anything, including customizations.

- Regarding your visit
An invitation ticket is required for admission, so please present this ticket on your screen or print it out and bring it with you. (One business card is required at the reception)

Please feel free to consult with us.
We look forward to seeing you there.

06/30/2023
Notice Notice regarding "MuCAD BOOK" software update
Thank you for using our website.
We have updated the "MuCAD BOOK" in our "Download" content as follows.
If your software version is different from the latest version, please install the latest version before use.

Update start date: June 14, 2023
Update details: Minor bug fixes.
Latest version: VER.1.0.3
06/30/2023
Notice Notice of "Catalog Revision" [Automotive Electronics Dispensing Solutions] Release
We have added the following new material to the Downloads section.

・Automotive Electronics Dispensing Solutions
 The content has been updated to align with the current automotive industry. Please take a look.

 We also plan to add other languages sequentially.
06/05/2023
Notice Notice of Addition of "Featured Applications" Case Studies
The Featured Applications section contains recently highlighted dispensing applications and case studies of production site challenges solved by introducing our dispensers.


We have added one new dispensing application related to medical and bio fields.
Featured Applications
・Automatic Weighing System
05/17/2023
Notice Information on Participation in the JISSO PROTEC Seminar
We will be participating in the PROTEC seminar at 2023 JISSO PROTEC.
Tokyo Big Sight, Special Venue next to the East Hall 5 Entrance (Seminar Venue I)
   In the dispensing market as well, there is a wave of solvent-free liquid materials and reduction of CO2 emissions in production lines, and user requirements for dispensing processes, including materials, are changing.
   In this seminar, focusing on keywords such as "solvent-free," "CO2 reduction," and "unmanned operation," we will introduce the dispensing solutions proposed by Musashi Engineering to meet these changing market demands.
   
   Registration is required to attend via this form.
    Also, please have one business card ready on the day of the seminar.

We look forward to seeing you there.
05/17/2023
Notice Notice of Exhibition at JISSO PROTEC

We will be exhibiting at JISSO PROTEC 2023.

- Date and Time
   May 31 (Wed) - June 2 (Fri), 2023, 10:00 - 17:00

- Venue
   Tokyo Big Sight

- Booth Location
   Booth No. East Hall 4, 4C-08

- Main Exhibited Products
  1. Dispensing equipment specialized for the mounting field. "FAD/FCD Series"
  2. (CIPG/FIPG) dispensing for circuit board cases. "MOHNOMASTER"
  3. Ideal for precision dispensing of two-component mixed materials. "DUAL-MPP"
  4. High-speed, non-contact dispensing of solder paste onto electronic circuit boards. "Super Hi Jet"
  5. High-speed, non-contact dispensing of high-viscosity liquids. "AEROJET"
  6. Ideal for high-speed dispensing of filler-containing thermal interface materials. "MSD3-HF"
  7. Laser bonding of solder paste. "Solder Dispensing/Laser Melting"

    We will also be exhibiting many other products for automotive, electronic components, and thermal management applications, including numerous new products.
    Please stop by our booth and feel free to consult with us about customizations or anything else.

- Regarding Attendance
   We recommend pre-registration for your visit; please take advantage of it.

 Please feel free to consult with us.
 We look forward to seeing you there.

05/10/2023
Notice Notice of Exhibition at Automotive Engineering Exposition Yokohama

We will be exhibiting at Automotive Engineering Exposition 2023 YOKOHAMA.

- Date and Time
May 24 (Wed) - May 26 (Fri), 2023, 10:00 - 18:00 (until 17:00 on the final day only)

- Venue
Pacifico Yokohama

- Booth Location
Booth No. 204

- Main Exhibited Products
1. The optimal solution for gasket seal (CIPG/FIPG) application. "MOHNOMASTER"
2. Ideal for precision application of two-component mixed materials. "DUAL-MPP"
3. High-speed, non-contact application of solder paste to electronic circuit boards. "Super Hi Jet"
4. High-speed, non-contact application of high-viscosity liquids. "AEROJET"
5. Ideal for high-speed application of filler-containing thermal interface materials. "MSD3-HF"

We will also be exhibiting many other products for automotive, electronic components, and thermal management applications, including numerous new products, so please stop by our booth and feel free to consult with us about customizations or anything else.


- Regarding Attendance
Please note that advance registration is required to attend, so please do not forget to register.

Please feel free to consult with us.
We look forward to seeing you there.

05/10/2023
Notice Notice of Exhibition at KOKO Exhibition
We will be exhibiting at the 2023 KOKUKOTEN Exhibition.
Shinshu Sky Park Yamabiko Dome
・Main Exhibited Products
1. The optimal solution for gasket seal (CIPG/FIPG) application: "MOHNOMASTER"
2. Industry 4.0 fully compatible, fully digital control dispenser: "ML-8000X"
3. High-precision liquid jetting for dramatic productivity gains: "SuperJet2"
4. Realizing automated production using desktop robots: "Multi-axis + Desktop Robot Dispensing System"
We will also be exhibiting many other state-of-the-art products for the automotive and electronic components sectors, so please stop by our booth and feel free to consult with us about customizations or anything else.


Please contact our sales representative regarding your attendance.
We look forward to seeing you there.
05/02/2023
Notice Notice of Exhibition at Highly-Functional Material Week Osaka (Adhesive & Joining Expo)
We will be exhibiting at the 2023 Kansai Adhesive & Joining Expo.
Intex Osaka
As the No. 1 comprehensive dispenser manufacturer, we will respond to advanced dispensing requirements in research, development, and manufacturing for automotive sectors advancing in ADAS, autonomous driving technology, and EV/PHV development; smartphone and wearable device sectors advancing in 5G communication; and power device and MEMS fields centered on IoT utilizing sensors, with our cutting-edge high-precision dispensing technology and FA technology refined through our dispensing expertise.
We look forward to seeing you there.

An invitation ticket is required for entry, so please present this ticket on your screen or bring a printed copy. (One business card is required at the reception.)
We look forward to your visit.
05/01/2023
Notice Notice of "New Product" [2-Component Spray Valve for Solvent-Free Coating Materials FSV/SSV] Release
We have added the following new pages to the "Product Information" section.

Fully Automatic Dispensing Systems
- Two-fluid Spray Valve for Solvent-free Coating Materials FSV
- Two-fluid Spray Valve for Solvent-free Coating Materials SSV
05/01/2023
Notice Notice of Addition of "Featured Applications" Case Studies
In the "Featured Applications" section, we feature recently highlighted dispensing applications and
case studies of production site problem-solving through the introduction of our dispensers.

We have added two new dispensing applications related to medical and biotechnology fields.
Featured Applications
・Automated analysis pretreatment system
・Mess-up system
04/12/2023
Notice Notice of Exhibition at Manufacturing World Nagoya
We will be exhibiting at the 2023 Manufacturing World Nagoya.
Portmesse Nagoya
As the No. 1 comprehensive dispenser manufacturer, we will meet the advanced dispensing requirements in research, development, and manufacturing for automotive sectors advancing in ADAS and autonomous driving technology, EV/PHV development, smartphone and wearable devices advancing in 5G communication, and power devices and MEMS fields centered on IoT utilizing sensors, with our cutting-edge high-precision dispensing technology and FA technology refined through our dispensing expertise.
We look forward to seeing you there.

An invitation ticket is required for entry, so please bring this ticket either by displaying it on your screen or printing it out. (One business card is required at the reception.)
We look forward to your visit.
04/11/2023
Notice Announcement of the release of the "New Product" [Vacuum Chamber Coating System MBC-V]
We have added the following new page to the "Product Information" section.

Fully Automatic Dispensing Equipment
- Vacuum Chamber Dispensing System MBC-V
04/07/2023
Notice Announcement of our exhibition at productronica china

Notice of Exhibition at productronica China


We will be exhibiting at the comprehensive electronics trade show featuring electronic components, manufacturing equipment, power devices, etc.,
the productronica China, held from Thursday, April 13 to Saturday, April 15, 2023.
Exhibition Name: productronica China
Dates: April 13 (Thu) – 15 (Sat), 2023
Hours: 10:00 – 17:00
Venue: Shanghai New International Expo Centre (SNIEC)
Booth Number: Hall 5 5102

This exhibition is a comprehensive electronics trade show featuring electronic components, manufacturing equipment, power devices, etc.
We will be showcasing a range of products that meet the advanced coating requirements in their R&D and manufacturing.
We offer a wide variety of products, from nozzles to fully automated equipment.
Please come and see our "latest FA and dispensing systems" that cannot be achieved with single-structure discharge heads.


Exhibited Products

We will be exhibiting many new products and new applications.
For details on the exhibited products, please see the links below
or click on the product images.

・ [New Proposal]Liquid metal jet coating "Super Jet2"
⇒ Click here for the liquid metal application page.here.

・ [New Proposal]High-flow, high-speed sintering paste thin-film coating "MSD3-HF"
・Fully automatic multi-purpose dispensing machine "FAD2500"
・High-speed, precision grease shooting from any angle! "GREASE JET"
・High-speed PUR seal coating "HM-MSD3"
・Liquid gasket coating for ECUs "MOHNO MASTER"
・Two-component thermal interface material coating "MPP-3-GF-MINI"
・Clog-free micro-dispensing of solder and Ag paste "DSHN"





We will be exhibiting many other state-of-the-art products, so
please stop by our booth and feel free to consult with us about anything, including customization.

04/04/2023
Notice Announcement of the renewal of the "Company History" section on our corporate website
We have renewed the "Company History" section of our corporate information page.
We have improved the page to make it easier for all users to view and understand.

We appreciate your continued support.
04/03/2023
Notice Announcement regarding the expansion and relocation of our Thailand branch

Thank you for your continued support of our products.
We are pleased to announce that our Thailand branch will be relocating to larger premises to accommodate our business expansion.


All of our staff are committed to further improving our services to ensure your satisfaction.
We look forward to your continued patronage.



No.36 Soi Bangna -Trad25, Bangnanuea, Bangna, Bangkok 10260 Thailand



There is no change to our telephone number.



April 3, 2023

*Please be careful to ensure that items are sent to the correct address.
03/29/2023
Notice Notice regarding "MuCAD BOOK" software update
Thank you for visiting our website.
We have updated the "MuCAD BOOK" content in the "Download" section as follows.
If your software version is different from the latest version, please install the latest version before use.

Update start date: March 29, 2023
Update details: Minor bug fixes.
Latest version: VER.1.0.2
03/20/2023
Notice Notice regarding "MuCAD BOOK" software update
Thank you for visiting our website.
We have updated the "MuCAD BOOK" content in the "Download" section as follows.
If your software version is different from the latest version, please install the latest version before use.

Update start date: March 20, 2023
Update details: Minor bug fixes.
Latest version: VER.1.0.1
02/22/2023
Notice Announcement of our exhibition at PharmaLab Expo Osaka
We will be exhibiting at INTERPHEX Week Osaka 2023.
INTEX Osaka
This exhibition is the largest specialized exhibition in Western Japan where products and services related to pharmaceutical research and development are gathered. We will be exhibiting a range of products for the pharmaceutical, bio, and medical fields to meet the advanced coating requirements in these research, development, and manufacturing processes.
We offer a wide variety of products, from nozzles to fully automated equipment. Please come and see our "latest FA and dispensing systems," which cannot be achieved with a single-structure discharge head.

An invitation ticket is required for entry, so please present this ticket on your screen or print it out and bring it with you. (One business card is required at the reception.)
We look forward to seeing you there.
01/18/2023
Notice Announcement of our exhibition at JFlex
We will be exhibiting at JFlex 2023.
Tokyo Big Sight

This exhibition is a specialized event for flexible devices that contribute to the 5G era of "bending, stretching, and connecting." As a comprehensive manufacturer of FA and dispensing equipment, we will showcase a wide range of products that support research and development in the field of ultra-precise dispensing to meet the advanced coating requirements in these R&D and manufacturing processes.
We will propose a wide variety of products, from manual to semi-automatic, and from nozzles to fully automatic equipment, including dedicated dispensing heads compatible with solder paste, CIPG/FIPG, thermal interface materials, two-part curable materials, moisture-curable materials, PUR (reactive hot melt), grease, brazing filler metals, flux, UV, and more. Please come and see our "latest FA and dispensing systems," which achieve what single-structure dispensing heads cannot.

   Pre-registration is required to attend, so please be sure to register in advance.
 We look forward to seeing you there.
01/11/2023
Notice Announcement of our exhibition at NEPCON JAPAN and the organizer's seminar
Thank you for visiting the Musashi Engineering, Inc. website.
We will be exhibiting at NEPCON JAPAN, one of Asia's largest exhibitions for electronics development and assembly, held from Wednesday, January 25 to Friday, January 27, 2023.

Please click here for information on our NEPCON JAPAN exhibition and seminars.

Additionally, a special lecture by our company has been scheduled.
Advance registration is required (free to attend), so please sign up via the exhibition website.

[Overview of the Special Lecture on "Monozukuri" Power Supporting Japanese Manufacturing (Registration Required)]
■Date and Time: Thursday, January 26, 2023, 10:00–10:30
■Location: Conference Tower 6F, Room 608
■Title: "Controlling Liquids at Will! The Cutting Edge of Dispensing High-Tech That Transforms Manufacturing"
■URL: https://biz.q-pass.jp/f/6366/inw_tokyo_seminar23/seminar_register
*Advance registration is required for those who wish to attend (free to attend, registration required).
We hope you will take this opportunity to join us.

We look forward to your continued support.
12/12/2022
Notice Recommended browsers for our website
To ensure a comfortable experience on our website, we recommend using the following browsers.

・Google Chrome (latest version)
・Windows Firefox (latest version)
・Microsoft Edge (latest version)

Please note that older versions may not display the site correctly.
Please be aware of this in advance.

We encourage you to use our website with the latest browser environment.
We will continue to enhance our content and appreciate your continued support.
11/29/2022
Notice Announcement of our exhibition at SEMICON Japan
We will be exhibiting at SEMICON Japan 2022.

- Date and Time
   December 14 (Wed) - December 16 (Fri), 2022, 10:00 - 17:00

- Venue
   Tokyo Big Sight

- Booth Location
   East Hall 2, Booth No. APCS-2354

- Main Exhibited Products
   1. Multi-head support: High versatility for various applications. "FAD2500"
   2. High-speed dispensing and high-speed alignment for underfill for WLP, PCB, ceramic substrates, lead frames, carriers, etc.! "FAD5100"
   3. Ideal for LCM, camera modules, speaker diaphragms, and semiconductor lead frames! "Super Jet2"
   4. [New Product] Supports filler-containing thermal interface materials. Achieves high-tact/high-precision dispensing. "MSD-3-HF"
   5. Achieves high-speed and high-precision dispensing even on warped workpieces! "350PC Smart"

For consultations regarding products for the latest semiconductor front-end and back-end processes, semiconductor-related fields (substrates, electronic components, etc.), and other cutting-edge applications, or for customization requests,
please feel free to stop by our booth and consult with us about anything.

- Regarding Attendance
   Please note that advance registration is required to attend, so please do not forget to register in advance.


 We look forward to seeing you there.

11/24/2022
Notice Announcement of our exhibition at Adhesive & Joining Expo
We will be exhibiting at the 2022 Adhesive & Joining EXPO.

 ・Date and Time
   December 7 (Wed) – December 9 (Fri), 2022, 10:00–18:00 (until 17:00 on the final day only)

 ・Venue
   Makuhari Messe International Exhibition Hall

 ・Booth Location
   Hall 7, Booth No. 47-30

 ・Main Products Exhibited
   1. The optimal solution for gasket seal (CIPG/FIPG) application: "MOHNOMASTER"
   2. Ideal for precision application of two-component materials: "DUAL-MPP"
   3. Supports viscosity ranges up to 1,000,000 mPa・s: "Super Hi Jet"
   4. [Newly Developed] Desktop Dispensing Robot with Non-Stop Alignment "370pc SKY"
   5. [New Product] Fully Industry 4.0 Compatible, Fully Digital Control Dispenser "ML-8000X"
   6. Multi-head support: Achieving high versatility for various applications: "FAD2500"
   7. Fully automate the dispensing inspection process: "TAI1000"
   8. Automate your desktop fully automatic dispenser!: "TAD1000"

For consultations regarding our latest products for the automotive, electronic components, IT, bio, and medical fields, or for customization requests,
please be sure to stop by our booth and feel free to consult with us about anything.

 ・Regarding Attendance
   Please note that you will need to register for an invitation ticket to attend, so please do not forget to register in advance.


 We look forward to seeing you there.

11/24/2022
Notice Update on "Featured Applications" content: [Liquid Filling & Capping System]
In the "Featured Applications" content, we have posted recently highlighted dispensing applications and
case studies of production site challenges solved by introducing our dispensers.

We have newly added dispensing applications related to medical and bio fields.
Featured Applications
・Chemical Liquid Filling & Capping System
11/14/2022
Notice Update on "Featured Applications" content: [Liquid Metal Dispensing]
In the "Featured Applications" section, we feature recently trending dispensing applications and
case studies of production site problem-solving through the introduction of our dispensers.

We have newly added the following.
Featured Applications
・Liquid metal dispensing
10/21/2022
Notice Announcement of exhibition at NEPCON JAPAN Nagoya

We will be exhibiting at NEPCON NAGOYA 2022.

・Date and Time
   October 26 (Wed) – October 28 (Fri), 2022, 10:00–17:00

・Venue
   Portmesse Nagoya

・Booth Location
   Booth No. 14-50

・Main Products Exhibited
   1. The optimal solution for gasket seal (CIPG/FIPG) application: "MOHNOMASTER"
   2. Ideal for precision application of two-component materials: "DUAL-MPP"
   3. Supports a viscosity range up to 1,000,000 mPa・s: "Super Hi Jet"
   4. Evolved to a maximum speed of 333 shots/s! Significantly reduces production tact time: "AEROJET"
   5. Ideal for high-speed application of filler-containing thermal interface materials: "MSD3-HF"
   6. Achieves high-definition, thin-film coating: "CV-12"
   7. Semi-automate the screw tightening process! "Screw Tightening Robot"
   8. No masking required, no scattering, and freely controls everything from wide-area to spot coating: "FCD1000"
   9. Multi-head support: Achieves high versatility for various applications: "FAD2500"
   10. Fully automate the dispensing inspection process: "TAI1000"
   11. Automate your desktop fully automatic dispenser! "TAD1000"
   We will also be exhibiting many other state-of-the-art products for the automotive, electronic components, IT, biotechnology, and medical fields, so
please be sure to stop by our booth and feel free to consult with us about customizations or anything else.

・About Invitation Tickets
   Registration for an invitation ticket is required for entry, so please do not forget to register in advance.

 Please feel free to consult with us.
 We look forward to seeing you there.

10/11/2022
Notice Announcement of exhibition at Suwa Region Industrial Messe

We will be exhibiting at the Suwa Region Industrial Messe 2022.

- Date and Time
October 13 (Thu) - October 15 (Sat), 2022, 10:00 - 16:00 (until 15:00 on the final day only)

- Venue
Suwako Event Hall

- Booth Location
Booth No. C-51

- Main Exhibited Products
1. [Proven Track Record] Ideal for precision dispensing of two-component mixed materials. "Two-Component Dispensing System"
2. A dispensing platform for everything from research and prototyping to mass production. "Desktop Robot with PC-Controlled Image Recognition 350PC Smart"
3. Fully Industry 4.0 compatible, fully digital control dispenser. "ML-8000X"
4. Semi-automate your screw-tightening process! "Screw-Tightening Robot"
5. High-precision liquid jetting for dramatic productivity gains! "SuperJet2"
6. Two functions in one! Combines "powder filling" and "liquid filling"! "Powder + Liquid Automatic Filling System"
We will also be exhibiting many other state-of-the-art products for the automotive, electronic components, IT, biotechnology, and medical fields, so please stop by our booth and feel free to consult with us about customizations or anything else.

- Regarding Attendance
Please note that advance visitor registration is required to attend, so please do not forget to register.

Please feel free to consult with us.
We look forward to seeing you there.

09/22/2022
Notice Announcement of exhibition at Monozukuri Fair
We will be exhibiting at the 2022 Manufacturing Fair.

 ・Date and Time
   October 5 (Wed) – October 7 (Fri), 2022, 10:00–17:00 (until 16:00 on the final day only)

 ・Venue
   Marine Messe Fukuoka

 ・Booth Location
   Hall A, Booth No. AW-02

 ・Main Exhibited Products
   1. [Newly Developed] Powder dispensing and weighing in one system! "Filling & Automatic Filling System"
   2. For PCR test kit manufacturing. Automates tube filling & capping. "Liquid & Capping System"
   3. Fully Industry 4.0 compliant, fully digital control dispenser. "ML-8000X"
   4. Automate your desktop fully automatic dispenser! "TAD1000"
   We will also be exhibiting many other state-of-the-art products for the automotive, electronic components, IT, biotechnology, and medical fields, so please stop by our booth and feel free to consult with us about customizations or anything else.

 ・Regarding Attendance
   Please note that advance visitor registration is required to attend, so please do not forget to register.

 Please feel free to consult with us.
 We look forward to seeing you there.

09/12/2022
Notice Announcement of exhibition at SEMICON TAIWAN
We will be exhibiting at 2022 SEMICON TAIWAN.

・Date and Time
   September 14 (Wed) – September 16 (Fri), 2022, 10:00–17:00 (until 16:00 on the final day)

・Venue
   TWTC Nangang Exhibition Center (Taipei)

・Booth Location
   4F Stand No. L0528 (within the Dou Yee Enterprises booth)
   1F Stand No. I2716 (within the Hypersonic booth)

・Exhibition Details
   We will be showcasing our cutting-edge dispensing systems and fully automatic dispensing machines that contribute to high-precision, micro-volume dispensing, bonding, and joining processes in the semiconductor, packaging, and peripheral fields, with a focus on smartphones, automobiles, and MEMS.
   If you have challenges with dispensing processes, are considering improving productivity or reducing costs, or are interested in state-of-the-art dispensing technology, please be sure to visit our booth.

 We look forward to seeing you there.



09/05/2022
Notice Limited-time campaign announcement for the new ML-8000X product release
Thank you for visiting the Musashi Engineering, Inc. website.
We are pleased to announce a limited-time special campaign price for the release of our new product, the ML-8000X.
The campaign site for the "ML-8000X High-End Communication-Compatible Full-Function Digital Control Dispenser," which handles liquid materials with changing viscosity, can be found here.
For further details, please contact us via our inquiry form or reach out to your local sales office.
We appreciate your continued support.
08/22/2022
Notice Notice of exhibition at JASIS
We will be exhibiting at JASIS 2022.

- Date and Time
September 7 (Wed) - September 9 (Fri), 2022, 10:00 - 17:00

- Venue
Makuhari Messe International Exhibition Hall

- Booth Location
Hall 6, Booth No. 6B-302

- Main Products Exhibited
1. [Newly Developed] Powder dispensing and weighing in one system! "Filling & Automatic Filling System"
2. For PCR test kit manufacturing. Automates tube filling & capping. "Liquid Filling & Capping System"
3. Automatic dilution to any specified ratio. Can be set directly into analytical instruments. "Dispensing & Dilution System for Analytical Pretreatment"
4. Automates meniscus alignment during dilution! "Automatic Meniscus Alignment System"
We will also be exhibiting many other state-of-the-art products for the pharmaceutical, bio, and medical fields, so please stop by our booth and feel free to consult with us about customizations or anything else.

- Regarding Attendance
Please note that advance registration is required for attendance, so please do not forget to register.

Please feel free to consult with us.
We look forward to seeing you there.

07/26/2022
Notice Update on "FAQ" content
The "FAQ" content has been renewed.

07/14/2022
Notice Update on "Featured Applications" content
In the "Featured Applications" section, we have posted recently trending dispensing applications and
case studies of production site problem-solving through the introduction of our dispensers.

Featured Applications
・1-part/2-part thermal interface material dispensing
・Non-contact Jet dispensing
・Maskless coating
・3D alignment/contour dispensing

06/28/2022
Notice Announcement of exhibition at PharmaLab Expo (INTERPHEX JAPAN)
2022 PharmaLab EXPO(INTERPHEX JAPAN) We will be exhibiting.

- Date and Time
July 13 (Wed) - July 15 (Fri), 2022 10:00 - 18:00 (17:00 on the final day only)

- Venue
Tokyo Big Sight

- Booth Location
West Exhibition Hall 1F, Booth No. 12-9

- Main Exhibited Products
1. [Newly Developed] Two functions in one! Fills both "powder" and "liquid". "Powder + Liquid Automatic Filling System"
2. For manufacturing PCR test kits. Automates filling & capping of tubes. "Chemical Liquid & Capping System"
3. Effective for manufacturing viral infection testing equipment compatible with immunochromatography. "Antibody Line Coating Equipment for Immunochromatography"
4. Automatically dilutes to any specified ratio. Can be set directly into analysis equipment. "Dispensing & Dilution System for Pre-analysis Processing"
We will also be exhibiting many other state-of-the-art products for the pharmaceutical, bio, and medical fields, so please stop by our booth and feel free to consult with us about anything, including customization.

- Regarding Invitation Tickets
To attend, registration for an invitation ticket is required, so please do not forget to register in advance.

Please feel free to consult with us.
We look forward to seeing you there.

06/24/2022
Notice Notice of Additional Supported Languages
Thank you for using our official website.
We have expanded our supported languages from 5 to 10 so that people from many countries can use our site.

[Added Languages] German, French, Thai, Vietnamese, Indonesian

We will continue to provide various information, and we look forward to your continued support.
05/31/2022
Notice Notice of Exhibition at JISSO PROTEC
We will be exhibiting at 2022 JISSO PROTEC.

 ・Date and Time
   June 15 (Wed) - June 17 (Fri), 2022, 10:00 - 17:00

 ・Venue
   Tokyo Big Sight

 ・Booth Location
   East Hall 4, Booth No. 4E-04

 ・Main Products Exhibited
   1. Fully Automatic Multi-Purpose Dispensing Machine "FAD®2500"
   2. Fully Automatic PCB Coating System "FCD®1000"
   3. Dispensing Inspection Machine "TAI1000"
   4. [Newly Developed] Desktop Dispensing Robot with Non-Stop Alignment "370pc SKY"
   5. [New Product] Fully Industry 4.0 Compatible, Fully Digital Control Dispenser "ML-8000X"
   6. [New Product] 2-Component Thermal Interface Material Dispensing System for Pail Cans "MPP-GF-HF"

 ・About the Seminar
   We will explain the know-how of electronic component mounting and the latest industry trends.
   Title: MUSASHI's Dispensing Technology Contributing to Mounting and Assembly
05/31/2022
Notice Notice of Exhibition at FOOMA JAPAN
We will be exhibiting at 2022 FOOMA JAPAN.

 ・Date and Time
   June 7 (Tue) - June 10 (Fri), 2022, 10:00 - 17:00

 ・Venue
   Tokyo Big Sight

 ・Booth Location
   East Hall 3, Booth No. 3C-51

 ・Main Exhibits
   1. Powder filling and weighing system
   2. Candy molding
   3. Create the shape you desire: "Ornament Molding System"
   4. Chocolate layering: "3D Food Printer"
   5. Draw by spraying materials: "Multi-color Decoration System"

 ・Regarding Pre-registration
   Please note that pre-registration is required for your visit, so please do not forget to register in advance.
   Pre-registration

 We look forward to seeing you there.
04/08/2022
Notice Notice of Website Renewal
Thank you for visiting the Musashi Engineering, Inc. website.
Today, we have completely renewed our website.
This website has been created as a responsive site that can also be viewed from smartphones and tablet devices.

Please note that member information registered on the previous website cannot be used on the new website.
We apologize for the inconvenience, but we kindly ask that you register for a new login.

We will continue to strive to provide useful information and enhance the content for all our users.
We appreciate your continued patronage.
04/08/2022
Notice Notice of Exhibition at 2022 M-Tech Nagoya
We exhibited at the 2022 Nagoya Manufacturing World.
Thank you very much for visiting our booth.
・Date and Time
April 13 (Wed) - April 15 (Fri), 2022 10:00 - 17:00

・Venue
Portmesse Nagoya

・Booth Location
Exhibition Hall 1, Booth No. 3-24

・Exhibition URL
https://www.japan-mfg-nagoya.jp/ja-jp/about/mtech.html

・Information
As the No. 1 comprehensive dispenser manufacturer, we respond to advanced dispensing requirements in research, development, and manufacturing for fields such as automotive (ADAS, autonomous driving technology, EV/PHV development), smartphones and wearable devices (5G communication development), and power devices and MEMS centered on IoT using sensors, with our cutting-edge high-precision dispensing technology and FA technology refined through our application know-how.
We look forward to seeing you there.
04/08/2022
Notice Notice of Exhibition at 2022 Adhesive & Joining Expo Kansai
We exhibited at the 2022 Kansai Adhesive & Joining Expo.
Thank you very much for visiting our booth.
・Date and Time
May 11 (Wed) - May 13 (Fri), 2022 10:00 - 17:00

・Venue
INTEX Osaka

・Booth Location
Hall 5, Booth No. 15-3

・Exhibition URL
https://www.joining-expo.jp/

We look forward to seeing you there.
04/08/2022
Notice Notice of Exhibition at Automotive Engineering Exposition Yokohama
We will be exhibiting at the Automotive Engineering Exposition 2022 Yokohama.

 ・Date and Time
   May 25 (Wed) - May 27 (Fri), 2022 10:00 - 18:00 (closes at 17:00 on the final day)

 ・Venue
   Pacifico Yokohama

 ・Booth Location
   Booth No. 63

 ・Main Exhibited Products
   1. Fully Automatic Coating System "FCD1000"
   2. High-Viscosity Non-Contact Jet Dispenser "Super Hi Jet"
   3. High-Level Communication Compatible Full-Function Digital Control Dispenser "ML-8000X"
   4. High-Performance Mohno Dispenser "MOHNOMASTER"
   5. 2-Component Mixing Type Large-Capacity Volumetric Digital Control Dispenser MEASURING MASTER "MPP-3"
   6. Electrolyte Filling Pump "JUSTRO PUMP"
   7. Double-Thread Precision Solid Nozzle "DSHN-M2"
     
 ・Exhibition URL
   https://aee.expo-info.jsae.or.jp/ja/yokohama/

 We look forward to seeing you there. Please note that advance registration is required for entry, so please do not forget to register in advance.

Download Catalogs and Software

Login registration to this site is required for downloads.

If you have already registered, you can download them here.

New Member Registration

If you have not yet registered, you can download them after registering here.

Click here for inquiries
Click here for inquiries

Contact Us

Click here for inquiries

Inquiries via the web

Contact Us

Product selection, dispensing tests/demo machine rentals, quotes/delivery times, etc.

Instruction manuals, specifications, outline drawings, SDS, RoHS2, etc.

Product handling, repairs, specifications, etc.

Obtaining a non-applicability certificate

Other inquiries

Back to top