
Ag paste is a functional material that possesses both high electrical and thermal conductivity, as well as high reliability in mechanical bonding. On the other hand, due to the high cost of Ag, it is also a liquid material for which there is a high demand to dispense only the necessary amount to the necessary locations.
Musashi Engineering is developing micro-dispensing technology for Ag paste aimed at improving the usage efficiency of Ag paste and bonding ultra-fine components.
In this development, to achieve micro-dispensing via non-contact dispensing, we thoroughly optimized the dispenser structure and conditions to match the discharge characteristics of the Ag paste, thereby achieving a dispensing diameter of 31μm and a dispensing volume of 5pL. We believe these technologies will be utilized in future ultra-compact sensors, such as those for miniaturizing crystal oscillators and for physical AI.
Conductive paste can be routed from the substrate, via the side of the chip, to the conductive part on the top surface of the chip.
We have achieved continuous stable dispensing of over 1 million shots for solder pastes from Type 5 to Type 8.
With this technology, we have achieved the formation of micro-dots with a minimum diameter of φ64μm and thin films with a thickness of 19μm.
We have successfully performed underfill (UF) agent application while limiting the wetting spread from the chip edge to a minimum of 150μm.
We performed underfill (UF) application under extremely narrow conditions with a chip gap of 100µm and a standoff of 50µm.
Login registration to this site is required for downloads.


